№ 01 · 2026

Strata

pedestal table

Made to order Built by hand · priced to the piece

Strata — a live-edge wood spine set in turquoise resin on a hand-turned wooden pedestal, poolside on the Red Sea coast

A single slab, held in still water.

A live-edge length of figured hardwood, set adrift in a pour of Red Sea turquoise and lifted on a hand-turned wooden pedestal. The resin is cast deep and left with a soft, rippled surface, so the top catches light like water just disturbed — and the wood floats in it, grain and sapwood reading clean through the colour. The base is turned from solid wood: two rounded forms stacked, a stone balanced on a stone.

The piece

Form	Pedestal table — cast top on a single turned column
Top	Live-edge figured hardwood set in cast resin, rippled surface, raw cast edges
Resin	Red Sea turquoise, hand-tinted, poured deep any tint, clear to opaque — see resin colours
Base	Solid wood, hand-turned pedestal
Finish	Hand-finished and sealed
Dimensions	Made to order — sized as an accent, side or console piece for your room exact dimensions confirmed before the pour
Cure	A single deep pour, degassed and cured slowly before finishing
Care	How to care for a resin table

Made to order — each Strata is drawn to its slab and your room before the pour. No two tops are alike.

Each pour is one of a kind — this exact top will not repeat. The design can be ordered again; the pour cannot.

Strata — the live-edge wood spine reading clean through the rippled turquoise resin — The spine — figured wood, read clean through the pour.

Strata — the hand-turned solid-wood pedestal, two rounded forms stacked — The pedestal — turned from solid wood, by hand.

Strata — the pedestal table in a living room, in front of a sofa — Indoors — the same table, in a room.

Strata — a pair of the tables by the pool on the Red Sea coast — By the water, on the Red Sea coast.

A pair of Strata tables on a pool terrace on the Red Sea coast, turquoise resin echoing the water — On the terrace where they were finished.

In motion — the pour catching light, poolside and in the room.

The making

The Strata slab read close — raw crackled cast edge, rippled smoke-turquoise resin, and the figured wood spine running through the pour

The cast edge — left raw, exactly as it set The pour — hand-tinted, rippled like water just disturbed The spine — figured hardwood, read clean through the colour

Every Strata is made to order — its own slab, its own pour, no two the same. The wood is chosen first, for a length of grain with enough movement to hold the eye on its own. It is set into a mould and the resin poured deep in a single session, then cured slowly before the top is levelled, worked back and sealed. The pedestal is turned from solid wood, to carry the weight of the cast top on one quiet column.

Lead time is 6–12 weeks, made to order. We resolve the wood, the tint and the size with you first — the full method is on the craft page, and the background to resin-and-wood work is in river tables, explained.

Request a piece like this

Your Strata will not be this Strata — it will be your wood, your colour, your room. Send the rough size and where it will live, and we reply within two working days with wood and tint proposals.

Start your order WhatsApp the atelier

WhatsApp Inquire